Industrial Cameras FAQ/Corrupted images are acquired ...
Corrupted images are acquired from BU1203MCF camera. Please show how to fix it.(No.1493)
Application may receive corrupted images from a camera that requires wide bandwidth for transferring acquired images when the camera is transferring images through USB interface line whose effective bandwidth is not so wide.
Try the followings to fix it.
- Change PixelFormat of camera output image to smaller bit length one.
- Reduce Frame-Rate.
- Replace USB host controller with higher performance one.
- Replace PC with higher performance one.
Refer to "Recommended USB3.0 boards" in "Peripherals" tab page of "Description" in the following URL.
https://www.toshiba-teli.co.jp/en/products/industrial-camera/peripheral.htm
Try the followings to fix it.
- Change PixelFormat of camera output image to smaller bit length one.
- Reduce Frame-Rate.
- Replace USB host controller with higher performance one.
- Replace PC with higher performance one.
Refer to "Recommended USB3.0 boards" in "Peripherals" tab page of "Description" in the following URL.
https://www.toshiba-teli.co.jp/en/products/industrial-camera/peripheral.htm