Industrial Cameras FAQ/The transfer speed can only be...
The transfer speed can only be selected at S400 if you run TeliDCAM on Windows7. [IEEE1394 camera]（No.1465）
CSF series support block reading only in case of selecting S400.
This problem has been solved with CSF-B series.
When the host read out the data from camera register, it does not read out only one byte, but several bytes together, which is called "block reading".
This problem has been solved with CSF-B series.
When the host read out the data from camera register, it does not read out only one byte, but several bytes together, which is called "block reading".